A realistic two-minute care routine after each session, plus a monthly check list that catches wear early.
Home equipment rarely needs elaborate maintenance. It needs a quick wipe after use, a dry place to live, and an occasional look at the parts that move or carry load.
After each session: two minutes
- Switch the machine off and unplug it if you are going to clean around the controls.
- Wipe contact surfaces — plate, seat, handles — with a soft, slightly damp cloth.
- Dry the surfaces with a clean cloth; do not leave moisture around buttons or seams.
- Coil the cable loosely and put the remote and bands back in the same place.
Avoid harsh solvents, abrasive pads and sprays applied directly to the machine. Never immerse electrical parts. If the manual specifies a particular cleaner, follow the manual.

Once a month: five checks
| Part | Look for |
|---|---|
| Feet and pads | Loose, worn or uneven rubber that lets the machine rock |
| Bolts and joints | Anything that has worked loose; tighten to the manual's guidance |
| Power cable and plug | Cracks, kinks or exposed wire |
| Display and remote | Buttons that stick, or a remote that needs new batteries |
| Moving surfaces | Dust or grit in the plate area, belt or rails |
Storage between sessions
- Keep the machine away from damp, direct sunlight and extreme temperatures.
- Do not stack heavy objects on a platform or belt.
- If it folds, fold it only once it is dry and the cable is clear of the hinge.
- Keep the manual somewhere predictable — the settings you forget are usually in it.